Admittance Level Limit Switch (SLA Series)
The SLA series of admittance based level switches are designed to offer interference free signal transmission from the electronic insert to the evaluation unit. This level control has no moving parts, no mechanical wear and tear and offers added reliability in form of system fault detection. One can , calibrate the system from a remote location and the evaluation unit can be installed away from the the probe. The calibration controls are available in the evaluation unit.
The SLA admittance level sensor has a fail-safe high/low Selection feature available as a standard. This helps in reducing inventory since the same evaluation unit can be field-configured either for high or low level fail-safe detection. The system ignores the built-up of sticky and conductive material between the probe and the vessel walls. The system is based on a 3-electrode technique with coat-immunizing circuitry to create inactive region. The system is economic to install and uses ordinary 3-Core cable for interconnecting the electronic insert with the evaluation unit.
Fuel Level Sensor (TRANSlite)
Sapcon Instruments offers the TRANSlite family of fuel level sensor instruments which use the capacitance technology for accurate fuel and oil level measurement in process plants. TheTRANSlite family of fuel level sensors have no moving parts and can be ideally used in extreme plant conditions of high temperature and pressure.
The TRANSlite instrument range supports a power supply within DC automation is available from 11 to 55 VDC, addressing the need for 12V, 24V and 48V industrial supply options.4-20mA Current Loop is galvanically isolated (4 Wire) and PLC, SCADA compatible.4-20mA Current Loop can supply up to 1000 Ohm series load with 24VDC supply. This means 4-20mA signal can be carried to longer distance. The ease of calibration ensures user friendliness: “Just let it know the fuellevel for 4mA and 20mA, rest it will take care of.” Following are the options for you to choose from:
TRANSlite Fuel Level Sensor - It is composed of the specially developed Capacitance change gaging circuit. TRANSlite uses a fast RISC based processor which is the best in its class for evaluating fuel level using capacitance. The capacitance is formed by the sense rod and the metallic container wall. For non-metallic and/or non-uniform shaped containers, a metallic stilling well is provided. The amount of capacitance is proportional to the level of material between the sense rod and metallic wall of stilling container.
TRANS~lite Fuel Level Sensor - The best affordable liquid fuel level measuring solution for high temperature conditions. Its key feature is the ease of calibration which is not commonly available in this range of fuel level transmitters. TRANS~lite allows electronic-less measurement of level up-to 5 meters distance between the probe and the electronics.
TRANS2lite Fuel Level Sensor is a microcontroller based 2 wire capacitance fuel level sensor. TRANS2lite has temperature compensated electronics that provide a stable output. This fuel level sensor allows calibration in steps of 10% from 0 to 100% eliminating the need for rigorous emptying filling calibration.
Liquid Level Switch (Elixir)
Elixir is a microprocessor based liquid level switch which consumes low power and can be used for liquids up to 10000 cP and is suitable up to temperature limits of 200°C. This liquid level indicator is extremely compact making it suitable for constricted places.
This single point level switch for liquids uses the RISC Core micro-controller technology which makes it reliable & more accurate for level detection of any liquid or slurry (even highly viscous up to 10,000 cP). The instrument has an adjustable switching delay for covered and uncovered conditions. The electronics is integral with the fork and can be mounted in different ways such as wall/back panel mounting or remote mounting. If the use is in hazardous area, you could choose the flame proof version. You also have the flexibility of choosing the insertion length.
The Elixir liquid level control switch has no moving parts and is not affected by the turbulence in the tank, floating particles, suspensions or gas bubbles. This makes it a superior choice over the traditional float switch based level indicators. If the liquid/slurry service material is very viscous, Elixir IS the instrument of choice. The instrument neither requires adjustments nor is dependent on the position, thus making it the best option for liquid level indication in small tanks, pipes and mixing tanks.
- Belt Conveyors
- Bucket Elevators
- Level Switches
- Weighing Scales
- Weighing Systems
- Plant Automation
